Wednesday, June 2, 2021

Scrap Wood Bowl

 

This is a 7 inch bowl, 1.5 inches high. Segmented Poplar sides, and the base is solid woods, Spalted Maple in the center and a mystery wood on either side (Rosewood, Mahogany, Cherry?). This was, as usual, wet sanded with mineral oil up to a grit of 400, then finished off with a couple coats of Museum Wax,  buffed. I did a little textured center detail on the bottom side of the bowl, made with a home-made texturing tool I built myself. 




No comments:

Post a Comment