Small Maple Wood Bowl

click image to see larger version

Here is another small Maple wood bowl with nice figuring in the grain. It measures 3.75 inches in diameter and 1.5 inches high. Finished with a high speed wax polish.

Small Walnut Bowl

click image to see a larger version

Here is a small Walnut wood bowl turned on my lathe. Made from a very nice piece of wood too small for making much else out of it. Bowl measures 2 inches high and 5 inches in diameter.

Spalted Maple Box

Click on the image to see a larger version

This is a footed spalted Maple box turned on my lathe. It is 2.5 inches in diameter and 4.25 inches high. There were some voids inside this piece of wood which I filled with black Milliput epoxy. Here, I'm challenging myself with more difficult things to turn. I'd call this one a success.

Small Pear Bowl

Click on image to see larger version

This is a small footed bowl turned on my lathe. It is Pear wood. The dimensions are 1.75 inches high and 3.25 inches in diameter. The dark spot is a bit of bark, giving this bowl a unique bit of character. Up until now, it's been too cold in my shop to do this kind of work. Expect to see more soon.

Rolling Guitar Rack

I made a guitar rack because it takes up less space in my studio than a bunch of single guitar stands. This one holds 6 to 10 guitars depending on what kind I put on it. This stand takes up the space of 3 single guitar stands. It has wheels and the neck yokes on the top bar can slide along that bar to line up with whatever guitar I decide to but on it. This cost next to nothing to make . . . made from scrap wood and carpet, the wheels came off an office chair that broke . . . threw out the chair and saved the wheels.

Scrap wood bowl #2

This bowl is about 3.5 inches tall and a little over 4 inches wide. It is made from (top to bottom) white pine, mahogany, oak, mahogany, oak, mahogany, ponderosa pine, mahogany, and cabinet grade, maple veneer plywood. The bottom is recessed with 3 "feet" cut into it.

Glass Canister

Here is another canister I made from glued-together blocks of scrap wood from my shop. The canister is 9.5 inches tall and about 3 inches wide. The bottom is two pieces of 3/4 inch pine boards glued together and turned. It has a groove in the top side to accept the bottom of the glass cylinder. The bottom side of the base is hollowed out. The glass cylinder was made by cutting off the top and bottom of a wine bottle, keeping just the straight part. The lid was made from a block off layered scraps, top to bottom: Oak (knob), two 1/8 inch layers of Redwood, cabinet grade plywood, and Redwood at the bottom of the lid. The glass was glued into the groove.